Studies of the Influence of Temperature and the Energy State of the Surface Layer of Adsorbents on Wall Effects in Soap-Based Greases

This paper presents the results of studies of wall effects in commercial soap-based greases LT4-S2 and HUTPLEX EP-2, thickened with, respectively, lithium 12-hydroxystearate and overbased calcium sulfonate. The studies were conducted in the presence of five different materials: copper alloy C11000, bronze B476, EPDM rubber and PTFE and PU thermoplastics. The influence of the energy state of the surface layer of the adsorbents and temperature (ranging from ?20 to 60 °C) on the intensity of wall effects was investigated. Changes in the structural viscosity and shear stress in the boundary layer area in the greases and the soap-based thickener’s ability to adsorb on the surfaces of the adsorbents were determined by evaluating the rheological parameter plateau modulus.     

Psychosocial aspects of children and families treated with hemodialysis

Introduction: The aim of this study was to analyze the selected psychosocial aspects of chronic kidney disease in children treated with hemodialysis (HD). Methods: The study included 25 children treated with HD aged 2 to 18 years and their parents. Data concerning the illness and socio‐demographic parameters was collected. We used the Paediatric Quality of Life Inventory (PedsQL) for patients and for their parents the PedsQL‐proxy version, General Health Questionnaire (GHQ‐12), Berlin Social Support Scales (BSSS), and the Caregivers Burden Scale (CBS) to evaluate health‐related quality of life (QoL) of HD children and their primary caregivers. Findings: In the PedsQL test, the QoL of HD children was lower than in healthy children. Children treated with HD assessed their QoL on the PedsQL questionnaire higher than the primary caregivers, on all subscales as well as an overall health‐related QoL. Scoring below 2 on the GHQ‐12 test was reported in 56% of mothers, which may indicate that psychological symptoms have intensified. There was no correlation between BSSS, CBS, and GHQ‐12. Discussion: The assessment of QoL in pediatric patients would allow for the earliest possible identification of their nonsomatic problems and irregularities. This could, consequently, contribute to improving QoL in both children with chronic kidney disease and their families.     

Shaping Luminescent Properties of Yb3+ and Ho3+ Co‐Doped Upconverting Core–Shell β‐NaYF4 Nanoparticles by Dopant Distribution and Spacing

At the core of luminescence color and lifetime tuning of rare earth doped upconverting nanoparticles (UCNPs), is the understanding of the impact of the particle architecture for commonly used sensitizer (S) and activator (A) ions. In this respect, a series of core@shell NaYF₄ UCNPs doped with Yb³⁺ and Ho³⁺ ions are presented here, where the same dopant concentrations are distributed in different particle architectures following the scheme: YbHo core and YbHo@…, …@YbHo, Yb@Ho, Ho@Yb, YbHo@Yb, and Yb@YbHo core–shell NPs. As revealed by quantitative steady‐state and time‐resolved luminescence studies, the relative spatial distribution of the A and S ions in the UCNPs and their protection from surface quenching has a critical impact on their luminescence characteristics. Although the increased amount of Yb³⁺ ions boosts UCNP performance by amplifying the absorption, the Yb³⁺ ions can also efficiently dissipate the energy stored in the material through energy migration to the surface, thereby reducing the overall energy transfer efficiency to the activator ions. The results provide yet another proof that UC phosphor chemistry combined with materials engineering through intentional core@shell structures may help to fine‐tune the luminescence features of UCNPs for their specific future applications in biosensing, bioimaging, photovoltaics, and display technologies.     

A Chamber for Testing the Release of Volatile Substances Secreted by Animals,Especially Mammals,as Exemplified by Substances Released by Rats in Response to Stress

Abstract

The success of the testing of volatile organic compounds emitted by animals is dependent on the creation of appropriate conditions for air sampling subsequently used to assay and identify the compounds. These conditions play a particularly important role in the investigation of pheromones, which are secreted in extremely low concentrations. The authors have not come across any previous work which offers constructional solutions, which would allow avoidance of contamination of the air samples containing volatile substances secreted by animals.

A constructional solution was developed, which provides optimal conditions for their sampling and isolation. Its main advantages are as follows: the exposure chamber (the chamber in which the animal is studied) is filled with synthetic air; the exposure chamber is separated from the atmospheric air with a synthetic air “jacket”; the exposure chamber has been constructed using materials which do not release chemicals and absorb them in trace quantities.     

A medical hand tool physical interaction evaluation approach for prototype testing using patient care simulators

The purpose of this study was to develop and test a physical ergonomics assessment approach for medical device handles. The method assesses wrist posture and force of exertion simultaneously by task element. Electrogoniometers and EMG sensors were connected through a data acquisition module for synchronization with video recordings of trials. Task analysis of video recordings were performed offline with Observer XT software. Average posture and force data across several repetitions of individual task elements were calculated and presented in a format suitable for informing product designers of specific issues during a test trial. A handle comfort questionnaire is proposed to survey subjective responses. The evaluation approach was applied to an endoscope needle in sampling a biopsy from the stomach wall using a gastrointestinal track simulator with ten physician surrogates. The results showed that for all task elements the wrist was in extension (33(°)-45(°)). Peak muscle forces ranged from 28% to 68% MVC across the three muscles studied. Muscle peak forces were above ACGIH HAL maximum threshold limits for four of the seven task elements, and above the action limit for all seven task elements for two muscles. The handle comfort questionnaire data also supported the high muscle force findings, and also on force distribution on the handle due to contact stresses. This combined approach could be used to collect and report detailed early stage ergonomics data from user trials on patient care simulators. The approach is proposed for use by medical device designers at the design stage of new products using prototypes, but it could also be used on existing products with real patients.     

Organic whey as a source of Lactobacillus strains with selected technological and antimicrobial properties

Twenty‐five strains, isolated from raw, non‐pasteurised, organic whey samples, were identified phenotypically and genotypically. Biochemical tests were performed, and enzyme profiles, antibiotic resistance and antimicrobial properties were investigated. Sixteen strains were identified as genus Lactobacillus. Based on 16S rDNA gene sequence, the strains were identified as Lb. plantarum and Lb. fermentum. All of the strains had β‐galactosidase activity, and some of them reduced nitrate content. All strains utilised carbohydrates. The tested strains were characterised by low or average lipolytic and esterolytic activity. Moreover, the strains showed low proteolytic activity which is advantageous for their use as starter cultures for foods with low protein content. Strains Lb. fermentum S20, SM1, SM3, S2R and Lb. plantarum SM5 produced harmful N‐acetyl‐β‐glucosaminidase; moreover, the strain S20 produced also β‐glucuronidase. None of the strains produced α‐chymotrypsin. In phenotypic studies, most of the test strains were susceptible to gentamicin, ampicillin, tetracycline, chloramphenicol, penicillin and erythromycin. Strains Lb. plantarum S1 and Lb. fermentum S4, S7, S8, S10, SM1 and SM3 did not possess any transfer resistance genes. Antagonistic activity of the culture LAB strains was assessed as high or moderate in relation to the indicator strains, with the greatest zones of inhibition for E.coli and the smallest for L. monocytogenes ATCC 15313. This study reveals that the LAB strains isolated from organic whey have high potential for food application. Some strains of species Lb. fermentum (S4, S7, S8, S10) have been identified as the best candidates.